Stainless Steel 304L Pipe Fittings

ss 304l fittings is used in pipe system to connect straight sections of pipe to adapt different, sizes and shapes and for the purpose of regulating fluid flow. It is used in plumbing to manipulate the conveyance of water, gas, or liquid waste in commercial or domestic environments, within a system of pipes. SS 304 is one of the most versatile and widely used stainless steel and it is still sometimes referred by its old name 18/8 which is derived from its composition of being 18% chromium and 8% nickel. ASTM a403 wp304L elbow is installed between two lengths of pipe to allow a change of direction. Usually 90° or 45° elbows are available, a 90º elbow is also known as a "90 bend", "90 ell" or "quarter bend" and a 45° elbow is also known as a "45 bend" or "45 ell". Elbows are also categorized by length. The radius of curvature of a long-radius elbow is 1.5 times the pipe diameter, but a short-radius elbow has a radius equal to the pipe diameter. ASTM A403 WP304L is the most versatile and widely used alloy in the stainless steel family, which is ideal for wide variety of commercial and domestic applications. It exhibits excellent corrosion resistance, high ease of fabrication and outstanding formability. ASME sa403 wp304L reducer reduces the pipe size from a larger to a smaller bore. It refer to any fitting which causes a change in pipe diameter. This change may be intended to adapt existing piping of a different size or to meet hydraulic flow requirements of the system. Reducers are usually concentric, eccentric reducers and are used to maintain the top- or bottom-of-pipe level. ASME sa403 wp304L is for severely corrosive environment or when welding is required. It is preferred due to its greater immunity to intergranular corrosion. a403 wp304L tee is the most common pipe fitting which is used to divide or combine fluid. It is available with female thread sockets, solvent-weld sockets female thread sockets, solvent-weld sockets female thread sockets, solvent-weld socketsand a female-threaded side outlet.It can change the direction of a pipe run and can connect pipes of different diameters. a403 wp304L is very ductile and can be cold worked easily by roll forming, bending, deep drawing and other common fabricating methods. sa403 wp304L pipe end cap are commonly used in pipe work to dead end the flow of water or gas. It works as a protective device and are designed to protect pipe ends of various shapes. sa403 wp304L can be readily drawn and formed. It is well suited to severe forming applications involving forming of complex and multi draw operations. This is due to lower strength and lower work hardening rate. SS 304L weld fittings has various types of weld fittings such as end cap weld fitting, end cap reducer weld fitting, conical reducer weld fitting, 45° radius elbow weld fitting, tee weld fitting, reducer tee weld fitting, reducer cross weld fitting. SS 304L is austenitic stainless steel is generally considered to be weldable by the common fusion and resistance techniques. sus 304L stainless steel long radius elbow gives less frictional resistance to the fluid than the short radius elbows. It creates lesser pressure drop than short radius elbows. It is used where there is scarcity of space.

sus 304L stainless steel special consideration is required to avoid weld “hot cracking’’by assuring formation of ferrite in the weld deposit.

ss 304L seamless fittings are ideal for those pipelines that are installed under high pressure, corrosion and vibration condition.It is suitable for both pressurized and non-pressurized applications; it is available in wide range of construction materials depending upon the nature of media to be transported.

astm a403 wp304L buttweld pipe fittings is a part used in a piping system, for changing direction, branching or for change of pipe diameter and it is mechanically joined to the system.

astm a403 wp304L are suitable in the food and dairy industries as well as in rural and industrial atmospheric exposure.   wp304L elbow heat treatment is the method of adjusting the properties of steel by heat. The principal method of elbow heat treatment are case hardening, annealing case, hardening, tempering, normalizing and quenching.