Grade | C | Mn | P | S | Si | Cr | Mo |
P5 | 0.15max | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 4.00-6.00 | 0.45-0.65 |
P9 | 0.15 max | 0.30-0.60 | 0.025 | 0.025 | 0.25-1.00 | 8.00-10.00 | 0.90-1.10 |
P11 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
P22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 1.90-2.60 | 0.87-1.13 |
P91 | 0.08-0.12 | 0.30-0.60 | 0.02 | 0.01 | 0.20-0.50 | 8.00-9.50 | 0.85-1.05 |
V 0.18-0.25 | N 0.03-0.07 | Ni 0.40 max | Al 0.02 max | Cb 0.06-0.10 | Ti 0.01 max | Zr 0.01 max |
Mechanical Properties | |||||
Grade | Tensile strength(MPa) | Yield strength(MPa) | Elongation(%) | Impact energy(J) | Hardness |
P11 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P12 | ≥ 415 | ≥ 220 | ≥ 22 | ≥ 35 | ≤ 163HB |
P22 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P5 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 187HB |
P91 | 585~760 | ≥ 415 | ≥ 20 | ≥ 35 | ≤ 250HB |
P92 | ≥ 620 | ≥ 440 | ≥ 20 | ≥ 35 | 250HB |
NPS | OD Tolerance | NPS | WT Tolerance |
1/8″ ≤ NPS ≤ 1 1/2″ | +/- 0.4 | 1/8″ ≤ NPS ≤ 2 1/2″ , All T/D ratios. | +20%, -12.5% |
1 1/2 < NPS ≤ 4″ | +/- 0.79 | NPS ≥ 2 1/2″ , T/D ≤ 5% | +22.5%, -12.5% |
4″ < NPS ≤ 8″ | +1.59, -0.79 | NPS ≥ 2 1/2″ , T/D > 5% | +15%, -12.5% |
8″ < NPS ≤ 12″ | +2.38, -0.79 | (T= Specified Wall Thickness; D = Specified Outside Diameter) | |
NPS > 12″ | +/- 1% | ||
| Place of Origin | Not Given |
| Minimum Order Quantity | Not Given |
| Supply Ability | Not Given |
| Packaging Details | Not Given |
| Delivery Details | Not Given |
